Describe the water source
Tell us whether the water comes from a borehole, river, pond or tank. Include water-level changes, the intake location and any known sediment conditions to describe the starting point of the system.
Build around the irrigation plan
Provide the crop, irrigated area, irrigation method and operating hours. Separate the daily volume from the flow needed during watering, and include the pressure required by your irrigation equipment.
Include power and storage
For solar pumping, include the project location, seasonal demand and available storage. For an existing electrical supply, provide its voltage and frequency. Use these details alongside the model curves when discussing the pump and controller.
Pumping into a tank or directly to irrigation
Describe where the pump discharges. Filling a storage tank and supplying irrigation equipment directly create different flow, pressure and timing requirements. A tank can separate pumping hours from watering hours; the downstream irrigation pressure still needs its own check.
- For direct irrigation, provide the flow and pressure required by the zones operating at the same time.
- For tank filling, provide daily demand, usable storage and the height of the tank inlet.


