Start with the water you need
Record the required flow and its unit, the delivery destination and any pressure requirement. If you know only the daily volume, include the available pumping hours. These details give the model comparison a useful starting point.
Describe the site and power
Include water levels, pipe length and internal diameter, fittings, destination height and water quality. Add the available voltage and frequency, or the solar installation details. Keep measurements and estimates clearly distinguished.
If some information is missing
Start with a site sketch, clear equipment nameplates and the measurements already available. Mark anything not yet measured. Use the checklist below to keep the site conditions, candidate model and purchase quantity together.
Turn daily demand into a planning flow
For example, supplying 12 m³ over 6 pumping hours requires an average of 2 m³/h during those hours. This is a planning example, not a RIDA pump performance claim. Solar output varies through the day and by season, so this average alone cannot establish the panel size or pump model. Record the site location, critical month, storage capacity and pumping water level alongside it.
- Keep daily volume (m³/day) separate from flow while pumping (m³/h). For unit conversion, 1 m³/h is approximately 16.7 L/min.
- Record whether the pumping-hour estimate comes from a fixed electricity supply or a solar production estimate for the site and season.
Questions before choosing a pump
Can maximum flow tell me the daily water output?
No. Daily output depends on flow at the operating head over the actual pumping hours. Solar conditions vary by location and season. A maximum-flow value does not show that daily profile. Provide the site, target month, water demand and pumping water level for a system estimate.
These references explain general principles, not RIDA model specifications.
Information to prepare
Complete what you know; mark measurements that are still needed.
- Country / region and site
- Water source and water quality
- Daily water volume (m³/day) and seasonal demand
- Required flow (m³/h or L/min)
- Delivery elevation / pressure requirement
- Pipe length, internal diameter and fittings
- Available power and voltage / frequency
- Storage capacity and required operating hours
- Series / model, quantity and existing equipment
Opens the inquiry form with your details. Review them before selecting Submit inquiry.
Documents & references
RIDA documents contain product information; external references explain general pump principles.