Applications

Solar water pumps for agricultural irrigation

Plan pumping around your water source, irrigation method and daily water demand. Share the site and watering schedule to begin comparing pump series.

4RDC
Product series · 4RDC

Water route

  1. Well / river / pond
  2. Pumping & delivery
  3. Irrigation area

Use this route to describe your project. Equipment and controls depend on the selected configuration.

Describe the water source

Tell us whether the water comes from a borehole, river, pond or tank. Include water-level changes, the intake location and any known sediment conditions to describe the starting point of the system.

Build around the irrigation plan

Provide the crop, irrigated area, irrigation method and operating hours. Separate the daily volume from the flow needed during watering, and include the pressure required by your irrigation equipment.

Include power and storage

For solar pumping, include the project location, seasonal demand and available storage. For an existing electrical supply, provide its voltage and frequency. Use these details alongside the model curves when discussing the pump and controller.

Pumping into a tank or directly to irrigation

Describe where the pump discharges. Filling a storage tank and supplying irrigation equipment directly create different flow, pressure and timing requirements. A tank can separate pumping hours from watering hours; the downstream irrigation pressure still needs its own check.

  • For direct irrigation, provide the flow and pressure required by the zones operating at the same time.
  • For tank filling, provide daily demand, usable storage and the height of the tank inlet.

Prepare your project information

Start with the details you know. A site sketch or equipment nameplate can help explain the rest.

  1. Country / region and site
  2. Crop, irrigated area and irrigation method
  3. Water source and water quality
  4. Daily water volume (m³/day) and seasonal demand
  5. Required flow (m³/h or L/min)
  6. Delivery elevation / pressure requirement
  7. Pipe length, internal diameter and fittings
  8. Available power and voltage / frequency
  9. Storage capacity and required operating hours

Opens the inquiry form with your details. Review them before selecting Submit inquiry.

Product documents & further readingView selection information ↗